Shoes

When warm socks aren't enough, but waterproof shoe covers are too much, our Reflect Overshoe Socks are your ticket to warm toes. They're made from an abrasion-resistant, knitted yarn that not only adds an extra layer of warmth, but ensures you'll be using them for seasons to come. At the top of the overshoe, you'll find a reflective band that helps increase your visibility in low light conditions. - Anti-abrasion knitted yarn was used to provide long-term durability. - Reflective band across the top increases your visibility to motorists in low-light conditions. - Made for riding in transitional weather. - Two-hole cutout on the sole makes it compatible with road shoe cleats and walking pads.

IP1-Snap Boa® cartridge assembly for Expert Road and Women's Zante Road shoes. - Includes one cartridge dial assembly and lace. - Left- and Right-specific. - Not for resale, for warranty replacement

Your road shoes weren't made for walking, but that's just what you did. We can't blame you, though, especially when installing a Replacement Road shoe Heel Lug is so darn easy. Just install these on your S-Works Road shoes (2012 and earlier), and feel the tread under your feet again. - Replacement tread for S-Works 6 and Sub6 - Heel Lugs Only - Sold in pairs; with screws

The Trailcross range was built from the ground up, starting with the Five Ten dotted outsole with the addition of a recessed cleat to clip into compatible pedals. This was then refined with hiking in mind, bringing the additional ridged grip to the toe and heel. The Trailcross Clip-In is a lightweight and breathable shoe. With the need for the shoe to provide all-day comfort but also deliver across the contact points on and off the bike, the mid-sole EVA technology provides the necessary toe flex for hiking, without losing the all-important stiffness. The Trailcross Clip-In utilizes a hook and loop closure for added security and to reduce heel lift. Clip-in pedal users no longer need to compromise when planning their next adventure.

The adidas Five Ten Freerider Pro Mountain Bike Shoes match proven flat pedal control with enhanced impact coverage. Recycled materials raise the bar for sustainability. Stealth rubber and a Dotty tread offer the legendary pedal control you expect from the Freerider family. Their comfortable build lets you move easily from bike to street for everyday versatility. - Lace closure - Quick-dry synthetic upper - Impact-resistant PORON toe box - OrthoLite sockliner - EVA midsole - Stealth S1 Dotty rubber outsole - Yarn in upper contains at least 50% Parley Ocean Plastic and 50% recycled polyester

The Recon 2.0 was made for riders who seek out dirt roads and challenging trails in search of a shoe that delivers comfort and efficiency in a durable package, with the scientifically proven performance benefits of Body Geometry. Whether you’re saddling up a Diverge or Creo to ride with your gravel group or hopping on your epic to embark on an all-day trail session, the Recon 2.0 is your partner in crime for days spent in the dirt. Body Geometry: Like every Body Geometry shoe, the Recon 2.0 is ergonomically designed and scientifically proven to improve comfort, increase performance, and reduce the chance of injury for every rider with patented technology, while improving power by 7 watts - validated by science. Stride Technology: Stride technology provides a flexible outsole and upper around the toe box combined with a stiff cleat pocket, enabling the shoe to easily flex when walking and remain stiff and efficient when pedaling. Efficiency: The Recon 2.0 features a Li2 Boa Dial for adjustability on the fly, making getting in and out of the shoe a breeze. BOA soft-lace cables made from a Dyneema yarn allow us to do away with hard molded guides for a more comfortable fit. The forefoot strap above the toes helps riders adjust volume around their toes to tailor the fit to their unique foot, connecting you to the bike for confidence when hitting a new feature or tackling loose and technical gravel. - Body Geometry sole and footbed are built with purpose and backed by science to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Injection STRIDE toe-flex technology allows for natural toe movement off-bike but remains stiff for pedaling: Stiffness index 6.0 - Welded upper reduces seams for superior step-in comfort. - BOA® Li2 dials for on-the-fly micro-adjustment. - SlipNot™ rubber tread for confident traction on all terrain. - Two-bolt cleat pattern fits all major MTB pedals. - Approximate weight: 307g (1/2 pair, Size 42)

There is nothing like canvas to keep you cool during hot laps or at the post-ride hang spot. The 2FO Roost Canvas combines a durable canvas upper, cushioned EVA foam midsole, and relaxed fit to create a shoe that won't lose its cool. And our SlipNot ST rubber sole delivers unsurpassed flat-pedal grip and connection to keep you in control through the heaviest rock gardens, making the 2FO Roost Canvas a great pair of kicks with ridiculous trail performance and off-bike comfort and style. Paint Your Trail - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - SlipNot™ ST rubber sole for unsurpassed flat-pedal grip and connection. - Canvas and textile upper with added protection keeps you comfortable and is built to last. - Cushioned EVA foam midsole for comfort and impact absorption. - Relaxed Fit last for a balance of pedal feel and off-the-bike comfort. - Approximate weight: 360g (1/2 pair, Size 42)

Mountain: Biker, Climber, Guide, Explorer. For those who ride and hike, hike and ride, or simply find themselves going off trail, we created the Rime Flat. An approach shoe for the dedicated trail rider designed to have just as much performance when hiking as it does when riding. The proprietary SlipNot SuperTacky rubber sole was developed to strike a perfect balance of pedal grip and trail kick. To aid in climbing steep and loose trails, we've built in a flexible toe section that makes it easier to kick into the terrain, giving you a leg up when you hike up. - Built with Purpose. Backed by Science. Our Body Geometry trio of the Longitudinal Arch, Metatarsal Button, and Varus Wedge work together to increase efficiency; optimize hip, knee, and foot alignment; and reduce injury risks. - Welded mesh and TPU upper eliminates seams and is engineered for durability. - SlipNot ST rubber sole for unsurpassed flat-pedal grip and connection. - XPEL hydrophobic mesh construction reduces water absorption and dramatically improves drying time. - Cushioned EVA foam midsole for comfort and impact absorption with shank layer for impact absorption and stability. - Relaxed Fit last for a balance of pedal feel and off-the-bike comfort. - Approximate weight: 386.5 grams

The Recon 3.0 is all about putting the legendary performance of our S-Works Recon - power transfer, comfort, light weight, style - in a package perfect for the XC and gravel rider. Starting with Body Geometry, Recon 3.0 delivers comfort and efficiency, with features that stand-out off the beaten path. Looking for in the saddle speed as well as off-bike performance? Recon 3.0 mates a carbon outsole with a Pave-inspired glass fiber forefoot to create Carbon STRIDE toe-flex, which lets your foot function naturally off the bike, yet still provides incredible power transfer with a stiffness index of 10.0. Whether you're flying up a run-up on the 'cross course or strolling into the brewhouse post ride, STRIDE toe-flex is a game changer. We know venturing off-road means venturing into the unknown, so we've given the Recon 3.0 XPEL Mesh to create a comfortable fit that sheds water, keeping the shoe light and making it dry as fast as it rides. Our SlipNot compound provides full rubber coverage of the outsole for off bike traction on any surface, with open treads to eject mud. Dual L6-Snap Boas and a Velcro forefoot closure ensure micro adjustable comfort with a secure fit designed for all day comfort and performance, whether your ride calls for open gravel, twisting single track, and more than your fair share of hike-a-bike. - Body Geometry sole and footbed are built with purpose and backed by science to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Carbon STRIDE toe-flex technology allows for natural toe movement off-bike but remains stiff for pedaling: Stiffness Index 10.0) - Fully-welded upper reduces seams for superior step-in comfort. - Independent BOA L6-Snap dials for on-the-fly micro-adjustment. - SlipNot rubber tread for confident traction on all terrain with removable toe studs. - Two-bolt cleat pattern fits all major MTB pedals. - Approximate weight: 355g (1/2 pair, Size 42)

When the moment comes for an attack in the hills, a long solo move, or a full-gas sprint for the line, every watt counts, which is why we designed the S-Works Ares to be the most efficient and powerful performance shoe ever made. We combined decades of Body Geometry development with obsessive innovation working with the world's best athletes to completely reimagine the race shoe. An entirely new, patent-pending closure system, Dyneema-reinforced tongueless sock, and ultra-stiff FACT Powerline carbon outsole eliminate foot roll, reduce pressure on tendons, and transfer every ounce of power to the pedals for unprecedented performance and comfort. It's 1% faster than any shoe we've ever made, and at the finish line, that's all that matters. - The key to more comfort, fewer injuries, and higher power output comes from our ergonomically designed, scientifically tested Body Geometry features: Longitudinal Arch, Varus Wedge, and personalized insoles with a Metatarsal Button. When used in harmony, these three features align the hip, foot, and knee, while also limiting medial/lateral knee movement and maintaining good circulation down to your toes. - Patent-pending closure design secures the foot for extreme, out-of-saddle efforts, locking the metatarsals and preventing lateral roll. - Dyneema is sandwiched between layers of synthetic mesh and TPU to create no-stretch zones for the ultimate connection and comfort. - Our stiffest and lightest FACT Powerline carbon plate maximizes power transfer: Stiffness Index 15. - Independent BOA Li2 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee. - PadLock heel construction cradles the heel and is proven to improve acceleration. - Non-slip, replaceable heel tread with internally recessed screws for security. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Titanium alloy cleat nuts can rotate to position cleats 5mm rearward and fits all major 3-hole road pedals. - Approximate weight: 220g (1/2 pair, Size 42)

If you're looking for a versatile MTB shoe that can transition from hot laps in the park to cold beers at the base without missing a step, then look no further. The 2FO Roost Flat brings a casual, relaxed vibe with all the right DNA to get sendy on the bike. It combines a durable leather and textile upper, cushioned EVA foam midsole and relaxed fit last that can stand up to the rigors of daily trail use without sacrificing off-the-bike comfort and style. Last but not least, a new SlipNot ST rubber sole delivers unsurpassed flat-pedal grip and connection when things get rowdy. - Approximate weight: 360g (1/2 pair, Size 42). - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - Cushioned EVA foam midsole for comfort and impact absorption. - Leather and textile upper with added protection keeps you comfortable and is built to last. - Relaxed Fit last for a balance of pedal feel and off-the-bike comfort. - SlipNot ST rubber sole for unsurpassed flat-pedal grip and connection.

Tecno 4 Soft Instep Closure - Wire 2 - Ergo 5 - Genius 10 - Drako 2 - Dragon 5 - Dominator 10

The shoe that offers the best for everyone. Whether racing or a casual ride, the Sidi Genius 10 is simply the best platform for a great day in the saddle. Built on over 60 years of experience in manufacturing cycling shoes, Genius is designed on a carbon composite sole that offers the perfect combination of strength and comfort, while the Microtech upper adapts to the shape of the foot for superior comfort. -The Soft Instep Closure System is a wide, anatomically curved strap combined with a soft, thermo-formed EVA pad that distributes pressure evenly over the instep area -The Soft Instep Closure System is adjustable from both sides, to perfectly center the EVA pad over a high or low instep -Sidi's Tecno-3 System closure dials in fit along the entire length of the shoe, adapting the upper to the shape of the foot for a customized fit -Improved proprietary Sidi wire material is non-binding for intuitive and effortless on-the-fly adjustments -Like most Sidi small parts, the Tecno-3 system is serviceable and replaceable -The newly designed integrated heel cup is lightweight and reinforced to avoid deformations during prolonged strenuous use -The Carbon Composite Sole 20 is composed of nylon and injected carbon fiber. The result is a light and rigid sole that is impervious to humidity -The central part of the sole is graduated with a millimetric scale to facilitate accurate and repeatable cleat set-up -For walkability, Sidi cycling shoes include a user replaceable polyurethane heel pad

The Sidi MTB Speed 2 is a fast, efficient and durable shoe tested for the most difficult off road terrain. The ease of adjustment and clean design make it reliable and intuitive to use. -The Tecno-3 System dials in fit along the entire length of the shoe, adapting the upper to the shape of the foot for a customized fit -Like most Sidi small parts, the Tecno-3 System is serviceable and replaceable -The Sidi MTB Competition Sole has been specifically designed for mountain biking and can be fitted with two toe spikes on the front for traction in difficult and muddy conditions. Toe spikes are sold separately -The reinforced heel cup stabilizes and supports the heel. Anatomically shaped to reduce heel slip and increase power transfer

The shoe that offers the best for everyone: whether racing or a casual ride, Genius 10 is simply the best platform for a great day in the saddle. Built on over 60 years of experience in manufacturing cycling shoes, the Sidi Genius 10 is designed on a carbon composite sole that offers the perfect combination of strength and comfort, while the Microtech upper adapts to the shape of the foot for superior comfort -The Soft Instep Closure System is a wide, anatomically curved strap combined with a Soft, thermo-formed EVA pad that distributes pressure evenly over The Instep area -The Soft Instep Closure System is adjustable from both sides, to perfectly center The EVA pad over a high or low Instep -Sidi's Tecno-3 System closure dials in fit along the entire length of the shoe, adapting the upper to the shape of the foot for a customized fit -Improved proprietary Sidi wire material is non-binding for intuitive and effortless on-the-fly adjustments -Like most Sidi small parts, the Tecno-3 system is serviceable and replaceable -The newly designed integrated heel cup is light weight and reinforced to avoid deformations during prolonged strenuous use -The Carbon Composite Sole 20 is composed of nylon and injected carbon fiber. The result is a light and rigid sole that is impervious to humidity -The central part of the sole is graduated with a millimetric scale to facilitate accurate and repeatable cleat set-up -For walkability, SIDI cycling shoes include a user replaceable polyurethane heel pad -The women's specific fit is narrower across the ball of the foot and features less volume inn the instep area and a narrower heel cup

Sidi Memory Insoles.

Shot 2/Tiger 2 Double Tecno 3 Push System Half Pair from Sidi.

Push your limits in the great outdoors. These women's Five Ten biking shoes feature the BOA® Fit System for a custom fit. Seamless overlays offer abrasion resistance through rough terrain. The clipless shank is compatible with all mountain bikes. Made with a series of recycled materials, this upper features at least 50% recycled content. - Micro-adjustable dial-based BOA® Fit System plus hook-and-loop straps - Synthetic upper with seamless overlays - Non-slip heel cup - Clipless shank - Impact-resistant toe box

Designed for our professional athletes, the Sidi Tiger 2S efficiently transfers all the power you can unleash while maintaining a high level of comfort, allowing you to focus entirely on the course. The Tecno 3 closure is strategically placed to prevent contact with other riders in crowded situations. The upper is made of Bioveg material derived from recycled microfibers with a plant based external finish. The MTB SRS Carbon sole harnesses the strength of interwoven carbon fibers for efficient energy transfer and its SRS technology allows riders to maintain maximum grip level at all times. -The Tecno-3 Push Flex completely eliminates the pressure zone on the instep and significantly improves the comfort of the closure -Like most Sidi small parts, the Tecno-3 System is serviceable and replaceable -The adjustable heel retention device reinforces the top of the heel cup, closing the back of the shoe securely so the heel doesn't slide out during steep climbs or sprints -The all new Sidi Integrated Heel Cup is light, comfortable and reinforced to avoid deformation -Each side of the heel can be adjusted independently for a perfect fit -The upper part of the toe section is protected with anti-slip rubber to resist and deflect impacts from stones or debris when cycling -The MTB SRS Carbon-Ground Sole raises the standard for mountain bike performance, dropping around 100 grams per pair compared to the previous Dragon Carbon SRS sole without sacrificing power or durability -The MTB SRS Carbon-Ground Sole consists of replaceable tread blocks in the toe and heel attached to a medium-modulus carbon sole -The Ground SRS treads and MTB Plate are easily removable and replaceable and the sole is toe-spike compatible -To improve walkability, Sidi cycling shoes include a replaceable polyurethane heel pad

Designed for our professional athletes, the Sidi Shot 2S is crafted to deliver optimal power transfer while ensuring the utmost comfort, enabling athletes to stay focused on the road. Its carbon C-Boost sole harnesses the full strength of woven fibers, while the upper is constructed using Bioveg material derived from recycled microfibers and finished with an external plant-based coating. The innovative closure system is strategically positioned away from other riders, enhancing maneuverability in crowded situations. The adjustable heel retention mechanism allows you to secure the heel of the shoe, tightening the heel so that it conforms to any riders' heel shape. - The Tecno-3 Push Flex closure reduces the pressure zone on the instep and significantly improves the comfort of the closure  - The Adjustable Heel Retention Device reinforces the top of the heel cup and improves the fit by closing the back of the shoe securely around the rider's heel - The heel retention device tightens the top of the heel cup so that the heel is secured during steep climbs and sprints. Each side of the heel can be adjusted independently for a perfect fit - The all new Sidi integrated heel cup is reinforced to avoid deformation after prolonged efforts and extreme pressure. Anatomically shaped, it stabilizes and supports the foot while pedaling - The C-BOOST SRS Sole is made of the latest generation carbon, designed to conform to the metatarsal area, increasing the transmission of power directly to the pedals, guaranteeing ideal power transfer and support - Oval holes extend the adjustment position of the cleat by ± 5 mm and a millimeter scale is included for determining the riders personal cleat position - Provided with SRS (Sole Replacement System) inserts in Nylon and TPU, with the function of protecting the carbon in the areas most subject to deterioration from use and for increased durability while walking - The SRS inserts are integrated with ventilation holes that promote the circulation of air inside the sole with each pedal stroke

The iconic design that gave birth to our first cycling shoes over 60 years ago meets modern materials to create our lightest racing shoes. Designed to retain all support and strength, the Sidi Sixty offers the ultimate fit in a pair of racing shoes for cycling. -The Sidi Tecno-4 Push System has a single rotor to reduce the shoe's weight and guarantees the precision of a micro-metric closure -The Adjustable Heel Retention device reinforces the top of the heel cup and improves the fit by closing the back of the shoe securely around the rider's heel -The heel retention device tightens the top of the heel cup so that the heel is secured during steep climbs and sprints, each side of the heel can be adjusted independently for a perfect fit -The Vent Carbon Sole is handmade exclusively of carbon fiber in a weave pattern oriented at opposing angles that maximize stiffness while allowing for a small degree of controlled flex in the toe area -The Vent Carbon Sole features a standard 3-hole drilling pattern, printed 10 mm lateral and fore/aft cleat alignment scale for easy cleat alignment and replacement -The key benefits of the Vent Carbon Sole are not only superior power transfer because of its light weight and stiffness, but also warm weather comfort -For walkability, Sidi cycling shoes include a replaceable polyurethane heel pad

Technical Details: - Comfort fit - Bounder upper all seamless for comfort to prevent pressure points - New BOA Li2 micro-adjustment - Integrated X-Comfort Zone for a large range of feet width - Power Zone technology for better ankle support and stability to prevent adjustment - Carbon-injected/nylon outsole Ergo Grip 2 with improved traction on rocks - Removable studs for better traction in hard conditions - EVA insoles for better shock absorption - 12oz / 340g (size 42)

Technical Details: - Racer Fit for snug upper - Bounded upper all seamless for comfort to prevent pressure points - Integrated double X-Comfort Zone for a large range of feet width - BOA Li2, a new mechanism that generates higher power with finer resolution - PowerZone Technology for better ankle support and stability - Lace system with 4 independent adjustment zone to maximized comfort during long rides - 100% Carbon sole with Patented Air Chanel for constant airflow to prevent fatigue and numbness - 3D insoles with 3 adjustable arches for a custom fit - 7.9oz / 225g (size 42)

Ride further, whatever the terrain, whatever the bike, whatever the destination. The Sidi Eagle 10 is the best shoe for any day on the dirt, whatever your riding style. The Microtech upper, the first microfiber introduced in cycling shoes years ago by Sidi, is the most comfortable Sidi has ever offered, while the sole is designed to ensure the ideal combination of performance and comfort both on and off the bike. -The Soft Instep Closure System is a wide, anatomically curved strap combined with a soft, thermo-formed EVA pad that distributes pressure evenly over the instep area -The Instep Closure System is adjustable from both sides, to perfectly center the EVA pad over a high or low instep, ensuring an ideal fit -The Tecno-3 System dials in fit along the entire length of the shoe, adapting the upper to the shape of the foot for a customized fit -The all new proprietary SIDI Wire monofilament is completely non-binding for intuitive and effortless on-the-fly adjustments -The integrated heel cup, with a new light weight design is reinforced to avoid deformation during the most grueling of rides -The reflective inserts on the heel improve safety on the road, helping to signal the presence of the cyclist in conditions of poor visibility -The shape of the tread has been specifically designed for mountain biking, allowing improved grip, superior mud dispersion and great stability -The toe inserts are easily replaceable and offer the ability to mount crampons for particularly muddy rides -The Sidi MTB SR17 sole represents an ideal balance of stiffness for efficient power transfer and flexibility and comfort for walking

Specifically designed for gravel rides and long hours of cycling on terrain full of surprises, the Sidi Gravel shoe offers comfort and stability on road and off. -The Tecno-3 Push System dials in fit along the entire length of the shoe, adapting the upper to the shape of the foot for a customized fit -All new proprietary Sidi Wire material that is completely non-binding for intuitive and effortless on-the-fly adjustments -Like most Sidi small parts, the Tecno-3 System is serviceable and replaceable -Polyurethane shock absorber with inner padding designed to protect your feet -The reinforced heel cup that stabilizes and supports the heel. Anatomically shaped plastic, reduces heel slip and provides increased power transfer -Provides additional foot protection in the event of a crash -The Sidi MTB Competition Sole has been specifically designed for gravel biking and can be fitted with two toe spikes on the front for traction in difficult and muddy conditions. Toe spikes are sold separately

A fast and efficient shoe with tested strength and grip for the most demanding rides. Intuitive adjustments and a clean design make the Sidi Fast 2 an easy-to-use high-performance shoe. -The Single Tecno-3 system creates a perfect tension balance between the shoe's internal and external side, guarantees an excellent closure adapting to every instep -The newly designed integrated heel cup is lightweight and reinforced to avoid deformations after prolonged strenuous use -The Aerolite sole is designed to maximize aerodynamics and power transmission -The nylon and carbon fiber construction of the Aerolite Sole provides the ideal balance of stiffness for efficient power transfer, and flexibility for comfort -The Fast 2 includes a user replaceable polyurethane heel pad for improved stability and traction off the bike

The Sidi technology used for mountain biking is applied to the gravel discipline. The Sidi Dust Shoelace is a rigid high performance shoe with a tried and true closure design, technologically advanced and reliable. -The newly designed integrated heel cup is light weight and reinforced to avoid deformations after prolonged and strenuous use -Upper part of the toe section is rubberized to resist and deflect impacts from stones or debris when cycling -The Sidi MTB SR17 sole represents the ideal balance of stiffness for efficient power transfer and flexibility for walking -The toe inserts are easily replaceable and offers the possibility to mount spikes for particularly muddy rides

Whatever the journey, Sidi Aertis is there to make it easier and better. The comfort of a premium suede construction meets Firmor Closure technology to offer great lateral support. The nylon sole with replaceable rubber insert allows for maximum grip in any situation and increased walking comfort. -Designed for maximum lateral support the Firmor Closure contours the foot with a solid hold, and allows infinite size adjustment for the ideal individual fit -Sidi's Tecno-3 System dials in fit along the entire length of the shoe, adapting the upper to the shape of the foot for a customized fit -The closure uses a new proprietary Sidi Wire monofilament that is completely non-binding for intuitive and effortless on-the-fly adjustments -Like most Sidi small parts, the Tecno-3 System is serviceable and replaceable -The Sidi MTB SR17 sole represents the ultimate result in terms of stiffness for pedaling and flexibility for walking -The toe inserts are easily replaceable and offer the possibility to mount spikes for particularly muddy rides

The Sidi Wire 2S Road Shoes are engineered specifically for athletes who seek maximum foot stability when unleashing extreme power. Ventilated carbon sole with innovative Firmor Closure lateral support system suitable for athletes who need to combine power transfer with greater lateral foot stability. The specially designed dual-rotor closure offers the ultimate adjustment for the perfect level of lateral stability. -The Single Tecno-3 system creates a perfect tension balance between the shoe's internal and external side, and guarantees an excellent closure adapting to every instep -The Adjustable Heel Retention Device reinforces the top of the heel cup and improves the fit by closing the back of the shoe securely around the rider's heel -The heel retention device tightens the top of the heel cup so that the heel is secured during steep climbs and sprints, each side of the heel can be adjusted independently for a perfect fit -Oval holes extend the adjustment position of the cleat by ± 5 mm and a millimeter scale is included for determine the riders personal cleat position -For walkability, Sidi cycling shoes include a replaceable polyurethane heel pad. Wire's heel pad has a new design and it is very light -The Vent Carbon Sole is designed with an integrated vent and air channels for heat dissipation and air flow. The vent can be opened or closed for 4-season comfort

Engineered specifically for athletes who seek maximum foot stability when unleashing extreme power. Ventilated carbon sole with innovative Firmor Closure lateral support system suitable for athletes who need to combine power transfer with greater lateral foot stability. The specially designed dual-rotor closure offers the ultimate adjustment for the perfect level of lateral stability. -The Single Tecno-3 system creates a perfect tension balance between the shoe's internal and external side, and guarantees an excellent closure adapting to every instep -The Adjustable Heel Retention Device reinforces the top of the heel cup and improves the fit by closing the back of the shoe securely around the rider's heel -The heel retention device tightens the top of the heel cup so that the heel is secured during steep climbs and sprints, each side of the heel can be adjusted independently for a perfect fit -Oval holes extend the adjustment position of the cleat by ± 5 mm and a millimeter scale is included for determine the riders personal cleat position -For walkability, Sidi cycling shoes include a replaceable polyurethane heel pad. Wire's heel pad has a new design and it is very light -The Vent Carbon Sole is designed with an integrated vent and air channels for heat dissipation and air flow. The vent can be opened or closed for 4-season comfort -The women's specific fit is narrower across the ball of the foot and features less volume inn the instep area and a narrower heel cup

The shoe that offers the best for everyone: whether racing or on a casual ride, the Sidi Genius 10 Mega is simply the best platform for a great day in the saddle. Built on over 60 years of experience in manufacturing cycling shoes, Genius is designed on a carbon composite sole that offers the perfect combination of strength and comfort, while the Microtech upper adapts to the shape of the foot for superior comfort -The Soft Instep Closure System is a wide, anatomically curved strap combined with a soft, thermo-formed EVA pad that distributes pressure evenly over the instep area -The Soft Instep Closure System is adjustable from both sides, to perfectly center the EVA pad over a high or low instep -Sidi's Tecno-3 System closure dials in fit along the entire length of the shoe, adapting the upper to the shape of the foot for a customized fit -The Sidi Mega Last provides Sidi fit and performance to riders who have slightly wider feet -The Sidi Mega Last is 4mm wider across the ball of the foot, has more volume, a higher instep and a wider heel cup -Mega lasts are sized EE to EEE -Improved proprietary Sidi wire material is non-binding for intuitive and effortless on-the-fly adjustments -Like most Sidi small parts, the Tecno-3 system is serviceable and replaceable -The newly designed integrated heel cup is light weight and reinforced to avoid deformations during prolonged strenuous use -The Carbon Composite Sole 20 is composed of nylon and injected carbon fiber. The result is a light and rigid sole that is impervious to humidity -The central part of the sole is graduated with a millimetric scale to facilitate accurate and repeatable cleat set-up -For walkability, Sidi cycling shoes include a replaceable polyurethane heel pad

London Insulated Insoles from Sidi.

Tecno 3 Push Tensioner Original part replacement tensioner for Genius 10, Alba 2, Alba, Dominator 10, Trace 2, Trace.

Adjustable Heel Retention System from Sidi.

Replacement tread blocks for 2013 and newer full carbon Drako/Tiger.

Comfort Padded Insoles are the standard replacements for Genius 6.6, Wire, Drake, Ergo and Dragon.

Soft Instep Closure 2 - Kaos - Genius - Cape - Dominator

The Sidi Prima is designed for the modern rider. The Prima is easy to wear and adjust, thanks to its Firmor Closure and lightweight upper built to reduce foot fatigue. Its low-profile carbon nylon Aerolite Sole is engineered for efficient power transfer for sprinting, with enough flex and comfort for long rides. -The Single Tecno-3 System creates a perfect balance between the shoe's internal and external side, providing an excellent fit while adapting to every instep -The Sidi Mega Last provides Sidi fit and performance to riders who have slightly wider feet -The Sidi Mega Last is 4mm wider across the ball of the foot, has more volume, a higher instep and a wider heel cup -Mega lasts are sized EE to EEE -The newly designed integrated heel cup is light weight and reinforced to avoid deformations after prolonged strenuous use -Aerolite sole is designed to maximize aerodynamics and power transmission on the bike -The nylon and carbon fiber composite material of the Aerolite Sole provides the perfect balance of stiffness and flex for effortless and comfortable pedaling -For walkability, Sidi cycling shoes include a replaceable polyurethane heel pad

The Sidi T-5 Air is designed specifically for triathlon. The upper weathers rain and water without losing stiffness, and the closure system is easy to adjust and reliable, the T-5 Air is particularly suitable for giving your best during triathlon competitions. -The highly secure hook-and-loop closure is simple but reliable, easy to adjust and fine tune, especially on the bike -The newly designed integrated heel cup is lightweight and reinforced to avoid deformations during strenuous rides -The Carbon Composite Sole 20 is composed of nylon and injected carbon fiber. The result is a light and rigid sole, which does not lose its characteristics when climatic conditions change or with the passage of time -The central part of the sole is graduated with milli-metric scale for precise cleat position and fine tuning -For walkability, Sidi cycling shoes include a replaceable polyurethane heel pad

Classic do-it-all flat pedal mountain bike shoes. Often copied. Never duplicated. The adidas Five Ten Freerider Mountain Bike Shoes deliver legendary flat pedal control to support everything you do on your bike. Just the right blend of casual style makes for easy post-ride transitions. Stealth S1 rubber and a Dotty tread keep your feet firmly planted on pedals. A mix of leather and mesh adds the durability to keep you riding for seasons to come. SPECIFICATIONS - Lace closure - Leather and textile upper - One-piece molded cupsole - Stealth S1 Dotty rubber outsole - Imported

With the Recon 1.0 our goal was simple - put S-Works Recon-inspired performance in a very accessible package. Easier said than done, but we've created a shoe with Body Geometry comfort and efficiency in a durable, dirt-focused shoe. So yeah, mission accomplished. Using our exclusive STRIDE toe-flex technology, the nylon outsole uses a TPU-injected forefoot for natural movement off-bike, while still providing a stiffness index of 6.0 for in-the-saddle performance. The Recon 1.0 is a double threat - efficiency at the pedals with comfort and confidence off bike. To create traction off the bike in wet or dry, gravel or dirt, we've covered the nylon outsole with our SlipNot compound. We've also lifted the heel for an even more natural feeling while walking. Three Velcro closures make slipping into the Recon 1.0 easy, and creates a fit designed for all day comfort and performance, whether your ride calls for open gravel, twisting single track, and more than your fair share of hike-a-bike. - Body Geometry sole and footbed are built with purpose and backed by science to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Injection STRIDE toe-flex technology allows for natural toe movement off-bike but remains stiff for pedaling (stiffness index 6.0) - SlipNot rubber tread for confident traction on all terrain. - Two-bolt cleat pattern fits all major MTB pedals. - Approximate weight: 331g (1/2 pair, Size 42)

The pinnacle model within the Freerider family, the Freerider Pro VCS Mid includes upgraded features, including D30 ankle protection and a PRIMEKNIT ankle cuff to keep debris out. This shoe is for the all-mountain rider looking for added protection, quick-drying materials and unbeatable grip to keep them going over any trail. - Synthetic upper with impact resistant toe box for protection from trail hazards - Compression-molded EVA midsole balances pedal feel and power output - Hook-and-loop closure straps - D30 inner ankle protection - Primeknit ankle cuff keeps out unwanted debris from the trail - Stealth S1 dotty rubber outsole for unbeatable grip

For top comfort, Planet Bike's Blitzen Shoe Covers are made of windproof fabric lined with microfleece to keep you warm. They boast Velcro closures for easy on/off and reflective accents for safety.

96% Nylon, 4% Lycra The original DeFeet shoe cover is designed to be worn over road cycling shoes with cleat systems, providing an extra barrier against windchill and dirt. A three-season product for cool to cold conditions in damp or dry weather, Slipstreams feature a knit-in cleat guide to cut your own opening. Features a reflective strip on cuff for additional visibility.

Do-it-all flat pedal mountain bike shoes. Classic flat pedal performance. These adidas Five Ten Freerider DLX Mountain Bike Shoes offer the same legendary flat pedal control as the Freerider. The synthetic and coated leather upper raises the bar for style, durability, and weather resistance. Stealth S1 rubber and a Dotty tread keep your feet firmly planted on the pedals. Ride, hang out, and ride some more. SPECIFICATIONS - Lace closure - Synthetic and coated leather upper - One-piece molded cupsole - Stealth S1 Dotty rubber outsole - Imported

Mountain bike shoes for aggressive, gravity-fueled riding. Downhill or enduro, these adidas Five Ten Hellcat Pro Mountain Bike Shoes offer all-conditions control for gravity-fueled riding. Cleat-compatible with a stiff midsole, they allow for aggressive pedaling. A synthetic upper with abrasion-resistant weldings provides extra durability. Non-marking Stealth Marathon rubber grips pedals and ground alike. This product is made with recycled content as part of our ambition to end plastic waste. 20% of pieces used to make the upper are made with minimum 50% recycled content. SPECIFICATIONS - Regular fit - Lace and hook-and-loop closure - Textile upper - Molded sockliner - Abrasion-resistant weldings - Clipless-compatible - Stealth Marathon rubber outsole - Imported

The Five Ten Freerider EPS Flat Mountain Bike Shoe goes from riding to recreating with ease. Legendary flat pedal control supports everything you do on your bike, while weather-friendly leather provides comfort in all conditions. BMX-inspired comfort and casual style makes for easy post-ride transitions. - Weather-friendly PU Leather for durability and comfort in all conditions - PrimaLoft Gold insulation package to keep your feet warm - Heat-reflective footboard to retain body heat - Mid-flex midsole balances pedal feel and power output - Rubber cup sole for added durability - Stealth S1 Dotty outsole for unbeatable grip

The Trailcross Clip-In is the latest addition to the Five Ten Trailcross family, designed from the ground up with adventure at its core. Packed with all the Trailcross technology, this latest model provides clip-in performance on the bike and all-day comfort when hiking off the bike. The addition of the Clip-In model takes the range to the next level, making our award-winning design available to clip-in pedal users for the first time. The Trailcross range was built from the ground up, starting with the Five Ten dotted outsole with the addition of a recessed cleat to clip into compatible pedals. This was then refined with hiking in mind, bringing the additional ridged grip to the toe and heel. The Trailcross Clip-In is a lightweight and breathable shoe. With the need for the shoe to provide all-day comfort but also deliver across the contact points on and off the bike, the mid-sole EVA technology provides the necessary toe flex for hiking, without losing the all-important stiffness. The Trailcross Clip-In utilizes a hook and loop closure for added security and to reduce heel lift. Clip-in pedal users no longer need to compromise when planning their next adventure. - Lace & velcro closure - Breathable mesh - RPU overlays - Impact resistant toe box - Lightweight eva w/ hike a bike last - Stealth marathon

If you've never experienced the pain of riding with ice blocks for feet, consider yourself lucky. For the rest of us, however, it's a feeling that we'd be happy to never experience again. But without pieces like our Element WINDSTOPPER Shoe Covers, history is doomed to repeat itself this winter. Now, you almost certainly know the name "WINDSTOPPER Soft Shell," as it's synonymous with unrivaled protection and quality—and this is for a good reason. It provides amazing levels of wind and water resistance, without sacrificing anything to breathability. This means that your feet are going to stay warm and protected, not wet and clammy. And with abrasion resistance at key points of the construction, you'll be receiving these warming advantages for seasons to come. - Gore WINDSTOPPER Soft Shell provides resistance to both wind and water, without sacrificing anything to breathability, comfort, or layering ability. - Rear zipper closure securely blocks the elements from infiltrating the covers, while also easing entry and exit. - Abrasion-resistant bottom and toe panels increase the covers' lifespan. - Universal cleat opening means that the covers are compatible with both road and mountain shoes. - Reflective elements increase your visibility to motorists in low-light conditions.

The Torch 2.0 Road shoes are all about comfort — well, comfort and performance that is. Due to the materials, road shoes often feel stiff and uncomfortable. Specialized decided to address this annoyance head on, though. To do so, they've implemented a 100% mesh and TPU construction on the Torch 2.0 that allows for more wiggle room in the toe box and a less constrictive, sock-like feel. The upper is then paired with the medium-stiffness FACT carbon sole and a rubber heel and toe that provide the perfect degree of off-the-bike traction. For the closure, Specialized added a single lightweight Boa IP1 dial that features tool-free snap replacement capability, while also providing simple, on-the-fly micro-adjustments. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - Carbon sole with a 7.0 Stiffness Index is engineered to be moderately stiff, yet light with a rubber heel and toe for off-the-bike traction. - Lightweight Boa IP1 dial closure for on-the-fly micro-adjustment, backed by the Boa Lifetime Guarantee. - Mesh and TPU upper for a supple fit. - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 235g (1/2 pair, Size 42)

The S-Works EXOS EVO is the lightest off-road shoe we've ever created. Our world-class design team developed a proprietary Dyneema layup that drastically lowered the weight of the upper while simultaneously maximizing strength and increasing pliancy to create a 232g featherweight racing shoe for all terrain, with none of the weight. To secure the foot we've used the newly released BOA Li2 dial, featuring an increased level of micro-adjustment, a lower profile, and a refined ergonomic design to give riders the ability to precisely tune their fit. We've paired this precision fit with a reimagined toe box, which uses a sleeve that stretches comfortably over the top of the toes and forefoot while maintaining room for movement and flexion. The S-Works EXOS EVO also features the XC FACT carbon sole. Our stiffest and lightest off-road plate to date, the XC FACT sole has a stiffness index of 13.0. Which means all your power goes right to the pedals. And Like all our shoes, the S-Works EXOS EVO is built on the foundation of Body Geometry—to boost power, increase efficiency, and reduce the risk of injury by optimizing hip, knee, and foot alignment. With a proprietary Dyneema upper that comfortably wraps the foot without compromising hold, it's also the most comfortable XC race shoe we've ever made. - Built with Purpose. Backed by Science. Our Body Geometry trio of the Longitudinal Arch, Metatarsal Button, and Varus Wedge work together to increase efficiency, optimize hip, knee, and foot alignment, and reduce injury risks. - Our stiffest and lightest XC FACT carbon plate maximizes power transfer: Stiffness Index 13.0 - Lightest weight XC shoe on the market at only 464 grams: 232 grams (1/2 pair, Size 42) - A revolutionary Dyneema Mesh allows us to achieve weight without sacrificing hold for the ultimate connection and comfort. - BOA Li2 dial for on-the-fly micro-adjustment, backed by the Boa Guarantee. - SlipNot rubber heel and toe tread for confident traction on all terrain with removable toe studs. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. - Added Mudguard TPU layer for additional protection and durability. - Form Fit last with a Warp Sleeve vamp for the ultimate in connectivity, comfort, and speed. - Two-bolt cleat pattern fits all major MTB pedals.

Foot Out, Flat Out—the redesigned 2FO Flat 2.0 was made to get you from the top of the run to the bottom as comfortably and efficiently as possible. Its outsole features our SlipNot 2.0 rubber compound, which was developed as a system to create the best pedal connection possible. Contrary to popular belief, pedal connection isn’t just about rubber—the rubber hardness, stickiness, lug pattern, midsole thickness, and density all contribute to this connection. Our sole construction, informed by a pressure mapping study, led us to use softer foam in the forefoot with firm-over-soft foam in the rear, giving incredible pin penetration, while also reducing the “standing on a marshmallow” feeling that causes foot cramps on long downhills. Along with the new sole, we've also implemented a toe bumper and a captured foam layer, providing protection from rocks and roots when the trail gets gnarly. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - SlipNot 2.0 rubber compound is our softest, grippiest rubber, and it's optimized for the ultimate in pedal connection - Engineered lug pattern was specifically designed to integrate with pedal pins. - Dual-density midsole adapts to the pedal, protects the foot, and results in superb pedal control. - Captured foam in the upper protects the foot from impacts. - Air mesh on the tongue and uppers provides protection, while quickly shedding water weight. - Smooth, thermobonded upper for lightweight durability and a snag-free profile. - Cushioned EVA foam midsole is sealed with a protective skin for support and tear resistance. - Lacelock elastic keeps laces out of the chainrings. - Relaxed Fit for a balance of pedal feel and off-the-bike comfort. - Approximate weight: 347g (1/2 pair, Size 42)

Caliper Buckle Strap from Sidi.

Clipless-compatible mountain biking shoes for gravity-fueled riding. Seek out epic new descents or muscle through rough terrain. These adidas Five Ten Hellcat Mountain Bike Shoes provide all-conditions comfort and precision geared towards enduro and downhill rides. They're wide and stiff enough to give a controlled-pedal feel plus durable and impact-resistant. Riding clipless or flat, they offer the grip to power down your line. This product is made with recycled content as part of our ambition to end plastic waste. 20% of pieces used to make the upper are made with minimum 50% recycled content. SPECIFICATIONS - Regular fit - Lace and hook-and-loop closures - Coated leather upper - Molded sockliner - Stealth Marathon rubber outsole - Clipless-compatible - Imported

- More performance - Less discomfort - Better power transmission Full speed ahead – optimize your performance to the pedals! The IP Pro Solestar ergonomically stabilizes your foot on road and mountain bikes, supports efficient and comfortable movement, maximizes leg power and reduces discomfort. The IP Pro Solestar was developed with internationally renowned insole specialist Solestar.

- More performance - More comfort - Also suitable for walking Misalignment of the feet can significantly limit the enjoyment of cycling. With the IP Touring Solestar, Ergon offers all touring riders a significant gain in comfort, especially when covering longer distances. The patented stabilization delta keeps the foot in an ergonomic position, prevents discomfort and optimally transfers leg power to the pedal. Efficiency is maximized with a grippy surface made of nylon fabric. Finely ground walnut shells in the 3D foam padding aid in a keeping the feet cool. The insole shell, made of fiberglass composite, enhances pedaling efficiency. The IP Touring Solestar was developed with the internationally renowned insole specialist Solestar.

The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you'll forget you're wearing it. Leveraging data science, we refined every detail of the S-Works Torch's upper for improved fit and performance. The BOA cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer. Following RETÜL bio-mechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel. The S-Works Torch is scientifically crafted to disappear on your feet and off the front. - New upper features reinforcement in key zones while also offering adaptive fit zones to create a disappearing fit on the foot. - Based on data gathered from Retul foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retul data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Updated BOA cable routing improves lockdown while reducing pressure across anterior ankle ligaments. - Independent alloy BOA S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA Guarantee. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. - IMPORTANT FOR WIDE FIT—the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).

The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you'll forget you're wearing it. Leveraging data science, we refined every detail of the S-Works Torch's upper for improved fit and performance. The BOA cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer. Following RETÜL bio-mechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel. The S-Works Torch is scientifically crafted to disappear on your feet and off the front. - New upper features reinforcement in key zones while also offering adaptive fit zones to create a disappearing fit on the foot. - Based on data gathered from Retul foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retul data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Updated BOA cable routing improves lockdown while reducing pressure across anterior ankle ligaments. - Independent alloy BOA S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA Guarantee. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. - IMPORTANT FOR WIDE FIT—the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).

CLIPLESS TRAIL SHOE FOR HIGH PERFORMANCE RIDING A lightweight trail shoe with comfort and performance at the core of its design. The ATOP lace system is fast, convenient and precise. Make micro corrections fast and easily so that you have total bike control and comfort. This clipless shoe features a long cleat channel for the perfect pedal set up. Move the block forwards for a more power orientated ride, or farther back for more aggressive gravity riding. The breathable membrane makes this fast-looking trail shoe ideal for Spring / Summer / Autumn riding conditions. It is reinforced in key areas to ensure protection and extended product life. The overall shape, fit and construction of the Leatt 6.0 is ideal for trail, all-mtn and enduro riding. The sole features our durable RideGrip™ compound with a WaffleGrip pattern. This guarantees shoe durability, bike feel and grip off the bike if pushing the bike uphill or on slippery surfaces. If comfort and performance is what you are looking for, then the Leatt 6.0 are your next pair of shoes! Leatt SPD Channel offers all-pedal compatibility: - Unique to Leatt SPD channels with extended travel for all type of riding - Cleat shims included for all-round pedal compatibility RideGrip™ Compound delivers amazing traction for ultimate bike control: - Maximum tear, puncture and abrasion resistance - Aggressive lug thread design for greater traction off the bike - ATOP lacing system allows single hand micro adjustments - Enables micro-adjustments for the perfect fit and comfort - Easy to use on and off the bike, even with gloves on Adjustable, durable and breathable shoe upper: - Breathable mesh construction allows great temperature regulation and quick drying - TPU reinforcement for protection against the elements Control Flex Shank: - Semi-Rigid Flex control for great bike feel - Integrated design for a closer foot to pedal connection Midsole: - Anti-compression EVA for vibration and shock absorption Insole: - Anti-compression EVA insole for comfort - Active Carbon moisture wicking, quick dry, anti-bacteria, anti-odor material for comfort and hygiene Protection: - Molded heel shield for protection and heel retention - Strategically placed TPU reinforcement on toe, heel and perimeter Lining: - Active Carbon moisture wicking, quick dry, anti-bacteria, anti-odor Heel Grip: - Directional heel grip lining allows easy foot entry and retention while pedaling Weight: - 920 grams a pair US9.5

Pedal-gripping utility and elevated everyday style. Equal parts high-performance bike shoes and everyday trainers, the Five Ten Sleuth DLX Mountain Bike Shoes let you flow between rides, school, work or the coffee shop with all-around laid-back style. Genuine flat pedal control meets a do-it-all look with Stealth Phantom Rubber and a Dotty tread outsole. - Stealth Phantom offers unbeatable grip and non-marking utility - Dotty tread for optimal pedal control