Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Hubs

SRAM 746 Rear Disc Hub
$154.00
High quality sealed bearing hub is available in traditional and modern configurations. - Steel axle, aluminum end caps with steel knurled contact surfaces - Same proven driver mechanism as higher priced models - Spoke Interface: J-Bend - Hub/Brake Compatibility: 6-Bolt Disc - Skewer Included: No - Bearing Type: Sealed Cartridge
SRAM 900 Rear Hub
$225.00
Whether the goal is a finish line, epic adventure or simply getting back home again, SRAM'S 900 hubs are ready for the challenge. On the inside, the smooth and durable DOUBLE TIME drive mechanism ensures rapid engagement for quick and confident pedal responsiveness. SPEEDBALL bearings provide smooth, long-lasting rotation performance. Multiple spoke-count and cassette-capability options, as well as interchangeable end caps, make the 900 hubs a perfect choice for any disc-equipped road, gravel, cyclocross, cross country, trail, or enduro bike. - Versatile driver body can accept ROAD or MTB drivetrain, full spline or XD cassettes - Fully convertible with tool-free end caps - BOOST variants - 24, 28 or 32 spoke holes
DT Swiss 350 Hybrid Front Hub
$113.90
Reliable, simple, and e-bike specific hub. To withstand the higher torque of e-drive systems, the 350 hybrid is equipped with steel rotors and a specific 24T ratchet machined out of hardened steel. Oversized bearings ensure smooth running under extreme conditions.
DT Swiss 350 Road Rear Hub
$223.90
The 350 road hub delivers the amazing performance you've come to expect from DT Swiss at an incredible value. Fast and reliable, these hubs will roll for thousands of nearly frictionless miles. Plus, DT's legendary Ratchet System ensures precise engagement no matter how hard you stomp on the pedals.
Odyssey Clutch V2 Freecoaster Hub
$189.99
The Clutch Hub is a traditional clutch-based coaster hub design that eliminates all of the problematic elements on ordinary hubs and only keeps the parts that work. A new, super-strong FULL 14mm axle, bearing configuration, and drag mechanism design stops the need for constant repairs. Equipped with external slack adjustment, which can be done with a 2.5mm hex key through a hub shell access hole (can be adjusted without removing the wheel), and an improved plastic hub guard spec. Same Clutch coaster hub you’ve come to love, but with a few upgrades. Features: - Maximum strength axle design - Super-durable bearing arrangement throughout - 2.5mm hex key slack adjustment through hub shell access hole. No wheel removal required. - Super-durable drag mechanism design - Crankflip ready Improvements Over the Clutch V1: - 14mm chromoly axle bolts on both the drive and non-drive side for greater reliability - Improved clutch engagement - Improved manufacturing precision throughout - More slack than the V1 hub - All-new durable proprietary plastic spec for the removable hub guard Specs: - 36-hole, 2014-T6 aluminum shell - 9T Driver - Left or right hand drive - 22 oz / 623g Guard Options: - Plastic hub guard included (but optional to use) - Alloy hub guard also available
DT Swiss 350 Road Rear Hub
$223.90
Direct power meets simplicity—running smoothly day-in and day-out. The 350 hub was developed according to the credo: Reliability meets simplicity. The simultaneous engagement of the ratchets and the resulting large engagement area provide reliability. The plugged construction allows easy maintenance without the need for tools. Adaptation to different axle standards or modification of the engagement angle is also possible with just a few manual steps.
Stan's NoTubes 3.30/3.30Ti Rear Hub End Caps for XD Driver
$17.50
Replacement end caps for Stan's NoTubes rear hubs with XD Driver.
DT Swiss 350 Straight Pull Road Front Hub
$76.90
Direct power meets simplicity—running smoothly day-in and day-out. The 350 hub was developed according to the credo: Reliability meets simplicity. The simultaneous engagement of the ratchets and the resulting large engagement area provide reliability. The plugged construction allows easy maintenance without the need for tools. Adaptation to different axle standards or modification of the engagement angle is also possible with just a few manual steps.
DT Swiss 350 Road Front Hub
$76.90
The 350 road hub delivers the amazing performance you've come to expect from DT Swiss at an incredible value. Fast and reliable, these hubs will roll for thousands of nearly frictionless miles.
Shimano 105 HB-R7000 Rim Brake Front Hub
$32.99
Internal O-rings, a grease sleeve, and high-quality cup and cone bearings lend this 105-level hub high durability and smooth rolling. - Internal O-rings and grease sleeve - High quality, sealed Cup & Cone Bearing - High durability and smooth rolling for sustained performance
DT Swiss 350 Straight Pull Road Rear Hub
$223.90
Direct power meets simplicity—running smoothly day-in and day-out. The 350 hub was developed according to the credo: Reliability meets simplicity. The simultaneous engagement of the ratchets and the resulting large engagement area provide reliability. The plugged construction allows easy maintenance without the need for tools. Adaptation to different axle standards or modification of the engagement angle is also possible with just a few manual steps.
DT Swiss 350 Road Front Hub
$76.90
Direct power meets simplicity—running smoothly day-in and day-out. The 350 hub was developed according to the credo: Reliability meets simplicity. The simultaneous engagement of the ratchets and the resulting large engagement area provide reliability. The plugged construction allows easy maintenance without the need for tools. Adaptation to different axle standards or modification of the engagement angle is also possible with just a few manual steps.
DT Swiss 350s Straightpull Road Front Hub
$76.90
The value-packed DT Swiss 350s Straightpull road hub hits the sweet spot between light weight and reliability. The straight pull spoke design makes for a stiff, responsive wheel that will roll for thousands of nearly frictionless miles.
Shimano Deore XT M756A 10-Speed 6-Bolt Disc Rear Hub
$68.99
Shimano XT FH-M756 Series Rear Hub - Double contact bearing seals - Super polished bearing races for low friction rolling - Light alloy QR lever and nut - 6-Bolt rotor mount - Bearing Type: Loose Ball - Cassette Body Type: Shimano/SRAM 8, 9, 10 Speed - Center to Flange, Left: 33.5 - Center to Flange, Right: 20.5 - Flange Diameter Left: 61 - Flange Diameter Right: 61 - Hub Drilling: 32 - Hub/Brake Compatibility: 6-Bolt Disc - Rear Axle: QR x 135mm - Skewer Included: Yes - Spoke Interface: J-Bend - Weight: 495 grams
We The People Helix Freecoaster Hub
$149.99
Featuring WTP's very own, patented 3-point clutch friction system, the Helix hub will take you backwards in style and hold up to any peg abuse that comes its way. - Unique internal arrangement with face-bearing clutch stopper - WTP Patented "Tri-Point" friction system - Hub Drilling: 32 - Cassette Body Type: Single Cog Driver - Axle Size: 14mm - Spoke Interface: J-Bend
RaceFace Vault Front Hub
$219.99
- An oversized hub shell increases torsional and lateral stiffness - 6902 bearings for maximum durability - Wide bearing placement was designed to decrease load on the bearings - Low-drag labyrinth seals - Tool-free endcaps - Torque-cap compatible - Includes standard 15mm end-caps only, Torque must be purchased separately
All-City Go-Devil Rear Disc
$130.00
Hubs typically seem to fall into two general categories: light and very expensive or heavy and cheap. With this typical bike industry paradigm, we saw an opportunity. You see, for years we've been using high-end geared hubs from the manufacturer of our track offerings on our personal bikes. They are very lightweight (peep the specs) and just plain work. We decided to finally make those hubs available to you and corner the market in our own category: lightweight, affordable, and incredibly practical. We've ridden them on all kinds of bikes from the Electric Queen to the Mr. Pink and we're in love. They are reliable, dang light and very reasonably priced. We offer the Go-Devil in a minimal amount of configurations and ship them with all the necessary endcaps and a quick release skewer, future proofing them in case you want to use them on various bikes over the years. Quick Release lever and 12mm thru-axle endcaps are included. On all models we spec high-quality made in Japan stainless-steel sealed bearings. The splined freehubs have 28 points of engagement, the XD driver has 56. Oh, and we've got polished options as well. Kind of a big deal because polished hubs have become a rarity. - Weight: 277g - Includes 12mm thru-axle end caps and quick release skewer - Drive Side Center To Flange 18.5mm - Non-Drive Center to Flange 34mm - Non-Drive Flange Diameter 58mm - Drive Side Flange Diameter 49mm
Shimano Deore XT M8000 Rear Hub
$56.99
Shimano XT FH-M8010/M8000 Rear Hubs. - Double contact bearing seals - Super polished bearing races for low friction rolling - Shimano Quick-engagement freehub - Not compatible with Shimano 11-Speed Road cassettes - Cone bearings races ground by a Cubic Boron Nitride tool for smooth-rolling durability - Center Lock disc brakes provide reliable braking power (lockring sold separately)
Industry Nine Hydra Classic Boost 6B Front Hub
$240.00
- Made start to finish in Asheville, NC - Light weight and easy to service
Stan's NoTubes 3.30RD/3.30RDTi 12x142mm Thru-Axle Conversion Kit
$35.00
Converts a Stan's 3.30RD/3.30RDTi hub to a 12x142mm thru-axle.
Hope Pro 2 & Pro 2 Evo QR Front Hub Conversion Kit
$32.29
Hope Front Axle Conversion Kits · Compatible with Pro 2 and Pro 2 Evo hubs
Shimano Alfine Centerlock Dynamo Hub
$144.99
Shimano Alfine Center Lock Dynamo Front Hub - Compatible with 26 to 28-inch wheel sizes - Light alloy QR lever and nut - 6V, 3.0W output - Centerlock rotor mount - Spoke Interface: J-Bend - Weight: 575g
No Image
$459.99
Shimano's Alfine SG-S7001 Disc Brake Internally Geared Hub delivers an impressive gear range, spread across 11 speeds, all with the reliability and low maintenance you can only get with an internally geared hub. - Center Lock Disc Rotor Compatible
Chris King R45 Rear Hub
$455.00
When we set out to design our R45 hub we had over 30 years of bearing experience and 20 years of building hubs under our belts. The R45 is the culmination of that experience; we focused on creating a lightweight road racing hub that utilized hallmarks of Chris King components: precision, performance, and quality. Our R45 rear hub combines a redesigned RingDrive system with 45 teeth for lower drag and near instant engagement with a lightweight hub body and our legendary made-in-house bearings. Our bearings, available in steel and ceramic, have heat-treated, surgical grade steel races that are machined simultaneously, with tools of equal wear to ensure perfectly matched inner and outer races. The quality and speed of our bearings is what sets us apart from the competition and they are what you will feel and notice on every single ride. As Chris King bearing tracks burnish they get faster with age and all our hubs and bearings are fully serviceable for years upon years of demanding use. The patented Chris King RingDrive with 45-points of simultaneous-engagement will get your power to the ground fast, provide unmatched engagement, and give you that legendary Chris King angry-bee sound. - Engineered, manufactured and assembled in Portland, Oregon USA - 5-year built-to-last warranty - Legendary made-in-house bearings - Easily serviceable and completely re-buildable with our R45 Hub Service Tool
Shimano SLX M7100 Front Hub
$45.99
With simple setup and reliable trail performance, the SLX front hub is perfect for custom MTB wheel builds. - Easy disc brake rotor installation with Center Lock spline mount and lock ring - Tool-free 15mm thru axle system is stiff and lightweight - Simple setup and reliable trail performance
Shimano HB-RS470 Front Hub
$33.99
The Shimano HB-RS470 front disc brake hub features a Center Lock design, Internal Grease Sleeve, and Cup and Cone Bearing technology. - The Center Lock system makes for easy rotor installation with a quick and secure spline mount and lock ring - Hub features internal o-rings and a grease sleeve that helps maintain grease levels and increases service life
DT Swiss 370 Track Rear Hub
$128.90
Direct power meets simplicity—running smoothly day-in and day-out. Classic Track hubs are the right choice if it's about all-out sprinting and precise lap times. With their threaded axles and the proven DT Swiss bearing technology, they feel right at home racing on the track or navigating dense city traffic on a fixie. - Net weight: 332g - Application: Track - Material: Aluminum - Brake interface: Non-disc - Axle system: 10mm Nutted - Over locknut dimension (O.L.D.): 120mm - Number of holes: 24
DT Swiss 180 Straight Pull Road Front Hub
$383.90
Aluminium front hub for bicycle - 18P DBCL 24 holes, straight pull, black. Dimension: 12x100mm.
DT Swiss 240 Classic EXP Road Rear Hub
$436.90 - $465.90
Direct power transmission in every riding situation—240 with Ratchet EXP. With the latest generation of the 240 hubs, the strengths have been further enhanced. The latest Ratchet EXP freehub system increases the bearing lifetime thanks to the increased bearing distance. The new version of the end caps simplifies tool-free disassembly and makes maintenance easier. The hollow-machined ratchets transfer your energy directly into acceleration thanks to the 36 teeth.
DT Swiss 240 Straight Pull EXP Road Rear Hub
$436.90 - $465.90
Direct power transmission in every riding situation—240 with Ratchet EXP. With the latest generation of the 240 hub, the strengths have been further enhanced. The latest Ratchet EXP freehub system increases the bearing lifetime thanks to the increased bearing distance. The new version of the end caps simplifies tool-free disassembly and makes maintenance easier. The hollow-machined ratchets transfer your energy directly into acceleration thanks to the 36 teeth.
Page 1 of 3 Next page